Data Sheet

The JA71-HJ45 is a Dzus mount front panel designed to accommodate up to four helicopter headset jacks (TJT-120)

Machined from 6161T6 aluminium and finished with scratch resistant urethane paint, this plate is available in either
black (FED-STD-37038) or gray (FED-STD-36231).

This adapter allows installers to quickly mount mixed avionics resulting in a uniform, professional appearance.

Data Sheet

The JA71-ELT5 is a Dzus mount front panel designed to accommodate a remote ELT switch A3-06-3215. Machined from 6161T6 aluminium and finished with scratch resistant urethane paint, this plate is available in either black (FED-STD-37038) or
gray (FED-STD-36231). (Switch not included)

This adapter allows installers to quickly mount mixed avionics resulting in a uniform, professional appearance.

Data Sheet

Help prevent your valuable avionics from accidental damage. The JA71-PP1x is a single Dzus fastener plate with a raised handle which, when positioned adjacent to the avionics panel, reduces the chances of broken knobs, cracked screens, etc. Additionally, the JA71-PP1x may be used as a palm rest when adjusting controls in a turbulent environment.

Machined from 6061T6 aluminium and finished with scratch resistant urethane paint, this plate is available in either
black (FED-STD-37038) or gray (FED-STD-36321)

This adapter allows installers to quickly mount mixed avionics resulting in a uniform, professional appearance.

Data Sheet

This Dzus mount front panel is designed to accommodate a single Round Instrument Clamp type MS28042-2A.

Machined from 6061T6 aluminium and finished with scratch resistant urethane paint, this plate is available in either
black (FED-STD-37038) or gray (FED-STD-36321)

This adapter allows installers to quickly mount mixed avionics resulting in a uniform, professional appearance.

Data Sheet

This Dzus mount front panel is designed to accommodate a single Trig Compact Instrument. These include TT21 and TT22 Compact Transponders and TY91 and TY92 Compact Radios.

Machined from 6061T6 aluminium and finished with scratch resistant urethane paint, this plate is available in either black (FED-STD-37038) or gray (FED-STD-36321).

This adapter allows installers to quickly mount mixed avionics resulting in a uniform, professional appearance.

Data Sheet

The JA71-CH1 Cup Holder allows the user to store a water bottle or a can up to 2.9 inches in diameter. The matching design and colour to existing control heads present a professional look and feel to the instrument panel.

Data Sheet

Initially designed for Jupiter's JB69 Wireless Aircraft Intercom Adapter, the JA71-HL7 is ideal to secure most objects via Hook and Loop.

The JA71 Dzus Blanking Plate (spacer panel) allows the aircraft owner / operator to remove a piece of radio equipment from the cockpit Dzus rails and fill the void with a compatible sized cover plate. The matching design and color to existing control heads present a professional look and feel to the instrument panel for customers.


The JA71 is painted with a baked-on flat black (or gray) urethane finish to resist scratches and nicks. The rear side is milled out to accommodate switches or a printed circuit board. Testing to DO160 standards has been carried out on panel sizes ranging from 1 to 7 Dzus holes high.


Other Dzus hole sizes are available up to 30 Dzus hole high.

Data Sheet

Install Manual

JA71-005 3D PDF

JA71 Size Chart

Data Sheet

These two Dzus mount front panels are designed to accommodate either one or two of Jupiter Avionics’ USB Chargers, UJAC-001 or UJAC2-001. Machined from 6061T6 aluminium and finished with a scratch resistant urethane paint, these plates are available in either black (FED-STD-37038) or gray (FED-STD-36321).

These adapters allow installers to quickly mount the low profile UJAC-001 or UJAC2-001 USB chargers, resulting in a uniform, professional appearance.

Data Sheet

This Dzus mount front panel is designed to accommodate one of Jupiter Avionics’ USB Chargers, UJAC-001 or UJAC2-001. Machined from 6061T6 aluminium and finished with a scratch resistant urethane black paint (FED-STD-37038)

These adapters allow installers to quickly mount the low profile UJAC-001 and UJAC2-001 USB chargers, resulting in a uniform, professional appearance.

Data Sheet

This Dzus mount front panel is designed to accommodate the Mid-Continent 2-inch Standby Attitude Module, SAM®. Machined from 6061T6 aluminium and finished with scratch resistant urethane paint, this plate is available in Black (FED-STD-37038) or gray (FED-STD-36321).

The adapter allows installers to quickly mount the SAM®, resulting in a uniform, professional appearance.

Data Sheet

Typical Install

The JA71-Sx17 enables Dzus rail products to be mounted 90 degrees to the aircraft’s original rail system. Crew members can now access normally unusable rail space. Equipment control and legends can be viewed comfortably without strain.

Data Sheet

The JA71-C010 Clip Plate allows the user to make quick notes during flight on a conveniently located paper notepad. Easily refilled or removed with the high torque spring clip The matching design and colour to existing control heads present a professional look and feel to the instrument panel.

Data Sheet

The JA71-xxx series of Ventilated Dzus Mount Blanking Plates allows cooling air to be circulated within the avionics equipment console. The offset ventilation holes keep foreign object debris (FOD) from entering behind the control panel while allowing the free passage of air. The matching design and colour to existing control heads present a professional look and feel to the instrument panel.

Data Sheet

This Dzus mount front panel is designed to accommodate a standard ½ 3 ATI instrument. Machined from 6061T6 aluminium and finished with scratch resistant urethane paint, this plate is available in either black (FED-STD-37038) or gray (FEDSTD- 36321).

This adapter allows installers to quickly mount mixed avionics resulting in a uniform, professional appearance.

Data Sheet

These two Dzus mount front panels are designed to accommodate either one or two standard 2 ¼ inch circular aircraft instruments. Machined from 6061T6 aluminium and finished with scratch resistant urethane paint, these plates are available in either black (FED-STD-37038) or gray (FED-STD-36321).

This adapter allows installers to quickly mount mixed avionics resulting in a uniform, professional appearance.

Data Sheet

The JA71-Pxx and JA71-Txx series of mounting panels allow the aircraft customizer to install a professionally finished panel for the ever-present extra switches.

The -Txx series of panels can accommodate 3, 4 or 5 standard aircraft grade toggle switches. (e.g. Honeywell TL Series or MS24523)

The -Pxx series of panels can accommodate 3 or 5 square pushbutton switches (e.g. Korry Chromalux 389, Aerospace Optics Vivisun type I or III, Staco Systems Series 90)

All of these panels are manufactured as engraving-ready and can be laser engraved to suit the customer’s requirements.

Jupiter includes two Switch Hole Covers in every order for your customizing needs.

JA77-005 & 015 Data Sheet

JA77-006 Data Sheet

JA77-005 3D PDF

JA77-006 3D PDF

JA77-015 3D PDF

JA77-005 Config. Chart

JA77-006 Config. Chart

JA77-015 Config. Chart

JA77-005 Installation and Operating Manual

JA77-006 Installation and Operating Manual

JA77-015 Installation and Operating Manual

The JA77 Dzus Rail Switch Plate Series allows the aircraft customizer to present a professionally finished configurable switch panel for those ever-present extra switches.

The JA77-005 and JA77-006 accepts standard aircraft grade toggle switches (i.e. Honeywell TL series or MS24523) and the JA77-015 accepts standard ¼ inch Bushing Mini-Toggle Switches.

Blank legends and hole plugs are also available to cover unused switch positions.

3D.pdfs are included to show typical installation examples.

Switches and strain reliefs are not included.